The P600D switch chassis from ReadyLinks is a powerful and versatile platform designed for Layer 2 access switching, ideal for a variety of network environments including branch offices, campuses, and more. This chassis is part of the broader GLx portfolio, known for its robust performance and flexibility in handling both traditional and out-of-spec cabling. With its high power output and advanced features, the P600D switch chassis is designed to support the demands of modern network infrastructures.
The P600D is engineered to accommodate various ReadyLinks line cards, including RJ-45, F-Connector, BNC, and Combo port options. These line cards allow the distribution of fiber network speeds across a wide range of cable mediums such as CAT 3, CAT 5E, Phone Line (POTs), BNC, crestnet, speaker wire, and out-of-spec 1,000+ feet cable runs.
General Specifications:
-
Port Density Options:
- Supports line cards with 4, 8, or 12 ports, allowing for flexible and scalable deployments.
-
Supported Line Cards:
- RJ-45
- F-Connector
- BNC
- Combo port options
-
Power:
- Supports PoE, PoE+, and PoE++ with up to 600W power budget
- Reverse power capability for enhanced deployment flexibility
-
Features:
- Layer 2 Switching
- VLAN Support
- Spanning Tree Protocol (STP)
- Quality of Service (QoS)
- IGMP Snooping
- Port Security
- DHCP Snooping
- 802.1X Authentication
-
Management:
- Managed via ReadyView dashboard
- SNMP/Syslog integration
- Automatic firmware updates
-
Environmental:
- Operating Temperature: -10°C to 55°C
- Storage Temperature: -40°C to 70°C
- Humidity: 5% to 95% non-condensing
Physical Specifications
| GL-12xT-P600D | GL-24xT-P600D | GL-12xC-P600D | GL-24xC-P600D | GL-12xB-P600D | GL-24xB-P600D | |
|---|---|---|---|---|---|---|
| Mount Type | 1U Rack Mount | 1U Rack Mount | 1U Rack Mount | 1U Rack Mount | 1U Rack Mount | 1U Rack Mount |
| Dimensions | 12”(L) x 19”(W) x 1.75”(H) | 12”(L) x 19”(W) x 1.75”(H) | 12”(L) x 19”(W) x 1.75”(H) | 12”(L) x 19”(W) x 1.75”(H) | 12”(L) x 19”(W) x 1.75”(H) | 12”(L) x 19”(W) x 1.75”(H) |
| Power Consumption | 60-600W | 60-600W | 60-600W | 60-600W | 60-600W | 60-600W |
| Operating Temperature | 32 ~ 104 °F | 32 ~ 104 °F | 32 ~ 104 °F | 32 ~ 104 °F | 32 ~ 104 °F | 32 ~ 104 °F |
Throughput and Capabilities
| GL-12xT-P600D | GL-24xT-P600D | GL-12xC-P600D | GL-24xC-P600D | GL-12xB-P600D | GL-24xB-P600D | |
|---|---|---|---|---|---|---|
| PoE/PoE+/PoE++ Capable | Yes, 600W | Yes, 600W | Yes, 600W | Yes, 600W | Yes, 600W | Yes, 600W |
| Switching Capacity | 128 Gbps | 128 Gbps | 128 Gbps | 128 Gbps | 128 Gbps | 128 Gbps |
| AC Power Supply Option | Redundant (600W max) | Redundant (600W max) | Redundant (600W max) | Redundant (600W max) | Redundant (600W max) | Redundant (600W max) |
| DC Power Supply Option | 44-54VDC / 3-15A (In/Out power stacking) | 44-54VDC / 3-15A (In/Out power stacking) | 44-54VDC / 3-15A (In/Out power stacking) | 44-54VDC / 3-15A (In/Out power stacking) | 44-54VDC / 3-15A (In/Out power stacking) | 44-54VDC / 3-15A (In/Out power stacking) |
| Power Stacking | Stack up to 4 units for 2,160W of dynamic PoE+, PoE++ budget | Stack up to 4 units for 2,160W of dynamic PoE+, PoE++ budget | Stack up to 4 units for 2,160W of dynamic PoE+, PoE++ budget | Stack up to 4 units for 2,160W of dynamic PoE+, PoE++ budget | Stack up to 4 units for 2,160W of dynamic PoE+, PoE++ budget |
Stack up to 4 units for 2,160W of dynamic PoE+, PoE++ budget |
Initial Configuration Steps
The basic initial configuration of the P600D switch chassis is straightforward. Below, you'll find additional information and instructions for setting up and configuring the device for the first time. For advanced switch configurations, refer to the detailed documentation provided.
![BASE]
configure terminal
management mode readyview
readyview password-connect username readyview password readyview
readyview password-connect filenumber 1 username readyview password readyview
end
![VLAN_INTERFACE]
configure terminal
interface vlan 1
ip address dhcp
end
end
![SNTP]
configure terminal
sntp client server-address time.google.com response-time 3 zone-offset GMT0 time-offset 0
end-
Claim the Device:
- Claim the device to your Organization in the ReadyView Dashboard.
-
Add to a Network:
- Add the device to a Network.
-
Physical Connection:
- Physically connect the device to the local network.
-
Check-In and Firmware Upgrades:
- Allow the device to complete check-in and perform any initial firmware upgrades.
-
Final Configuration:
- Finish configuring the device from the ReadyView Dashboard.
Advanced Configurations
For advanced configurations and detailed setup instructions, please refer to the ReadyLinks P600D Switch Chassis Documentation. This documentation provides comprehensive guides and reference materials to help you leverage the full capabilities of the P600D chassis.
Support
For additional assistance, visit our Support section or contact our Support Team for personalized help and guidance on using the ReadyLinks P600D switch chassis.
The ReadyLinks P600D switch chassis is designed to provide reliable, scalable, and efficient network solutions, ensuring robust connectivity and advanced features to meet your networking needs.