Installation instructions

Fix the brackets on the side of the device using 8 * M3 flat head screws.

Install the GLx chassis in a 19" rack with M6 screws and nuts.

Connect the power supply to the unit.

Fix one side of the mounting plate on the wall.

Fix the other plate on the back of the device.

Slide the device over the mounting plate and install the security screw.

Install the metal wings face down pointing toward the back of the device.

Hang the unit on the internal crossbar of the pedestal.

Push the wire into the gap and hang the device on the wire.

Tighten the two mounting nuts to secure the unit to the wire.